12 LED Lighting System Kit Steering Brake Smart Simulation Flash Lights Replacement for 1/10 Scale Models Remote Control Car Yokomo Tamiya HSP HPI AXIAL RC4WD TRX

(31 reviews)
Estimate Shipping Time: 7 Days

Price:
$10.79 /Pc
Dispatch:
Usually will be shipped in 24 hours
Club Point:
5

Quantity:

Total Price:
Refund:
This 12 LED Lighting System Kit is suitable for 1/10 remote control cars. It have four colors lights, include white headlights, blue taillights, red brake lights and yellow turn lights. With improved circuit board, it can support High-V receiver and normal receiver. And one set of lights can be controlled by the transmitter.

Features:
Input voltage: 4.8-6.0V. Working current: 100mA
LED wire length: 35cm. Suitable for 1/10 remote control cars
Improved design of circuit board, HOSI power saving
Headlight white, blue taillight, brake light red, turn light yellow
12 LED Multi-color RC Car Flashing LED Light Lamp. Easy to install and operate

Specifications:
Name: 12 LED Lighting System Kit
Material: Plastic
LED bulb quantity: 12
Working Current: 100mA
Input voltage: 4.8V - 6.0V
Lights color: White, red, yellow, blue
Connection method: CH1 - Servo
            CH2 - Speed controller
            CH3 - Receiver
Suitable for: 1/10 Remote Control cars
LED cable length: about 350mm
Control wiring length: 185mm
Circuit board size: 55 * 35 * 15mm
Weight: 50g

Lights Description:
Headlights: 4 white LED lights
Connect the lighting system to the CH3 on receiver: the transmitter can independently control a group of lights, another group of lights are on when the car speed up; Not connect to the CH3 on receiver: one group of lights are always on, another group of lights are on when the car speed up.
Turn lights: 4 yellow LED lights
With the remote control change the direction, the lights will synchronous flashing.
Taillights: 2 blue LED lights, 2 red LED lights
The blue lights are always on. When the car speed up or brake, blue lights will go out. Only when brake, the red lights on.

Installation Method:
CH2 Transmitter:
Connect the plug of servo and ESC to the CH1 and CH2 on lighting system, and then connect the CH1 and CH2 to receiver.
CH3 Transmitter:
Connect the plug of servo and ESC to the CH1 and CH2 on lighting system, and then connect the CH1, CH2 and CH3 to receiver.

Package information:
Package size: 16 * 7 * 4cm / 6.3 * 2.8 * 1.6in
Package weight: 60g / 2.1oz
Polybag package

Package list:
1 * 12 LED Lighting System Kit
  • I***

    05-12-2024

    This product is okay.

  • A***

    04-12-2024

    Amazing product! The quality is fantastic, and it has exceeded all of my expectations. Would definitely buy again.

  • T***

    03-12-2024

    This product is excellent! It meets all of my expectations and works just as described. I’m very satisfied with the quality and performance. Highly recommend it to others!

  • B***

    02-12-2024

    Excellent product!

  • Q***

    30-11-2024

    This product is exactly what I was looking for. It’s durable, practical, and very easy to use. A great buy!

  • F***

    26-11-2024

    This product is exactly what I was looking for. It’s durable, practical, and very easy to use. A great buy!

  • X***

    24-11-2024

    This product is excellent! It meets all of my expectations and works just as described. I’m very satisfied with the quality and performance. Highly recommend it to others!

  • X***

    20-11-2024

    Highly recommend this product! It’s durable, reliable, and works perfectly for my needs. I’m very happy with my purchase.

  • G***

    15-11-2024

    This product has exceeded my expectations in every way. The quality is fantastic, and it does exactly what it promises.

  • Q***

    09-11-2024

    Very good product, I like it very much

  • S***

    05-11-2024

    very good.

  • D***

    24-08-2020

    Need to get rid of the blue light. Building my own lights. Just don't like the vast number of wires interfering with body removal. Going to hook up a single power line and on/off on 3rd channel. Don't care about the lights going on and off with steering, throttle, brakes. Just want lights. Also need different size LEDs for many areas.

  • N***

    12-05-2020

    sadly this did not have the amber lights I needed for my RC, so I couldn't use them...

  • E***

    11-01-2020

    Cold light kit. Everything works It has been used on my track for more than a year without any problem. I added lights mainly to make the headlights brighter. I made some changes to the suite. I don't like the taillights to go out when it advances. That's why I give it 4 stars. Everyone loves to blink! It will be used again by this toolkit.

  • A***

    09-01-2020

    Very happy with the product suite you will be using

  • O***

    04-03-2019

    It did exactly what they said it did i like that part of it, it goes with my truck exactly

  • Q***

    23-12-2018

    God set the lights for an rc car !!

  • I***

    25-05-2018

    Part Arrived on time and exactly as described

  • E***

    20-05-2018

    Thank you ! And Lightning fast

  • A***

    08-04-2018

    look better for new project, like a info sheet

  • A***

    16-02-2018

    Great Seller, item as described ships really fast! Would buy again ! Thx!

  • I***

    17-01-2018

    Great seller. Fast shipping. Thanks.

  • E***

    15-01-2018

    Perfect

  • Q***

    12-01-2018

    Exactly as described. Great prices and really fast shipping. Thanks!

  • U***

    25-12-2017

    Another great product At a awesome price! <ol

  • Q***

    13-12-2017

    This turned out to be a pretty good kit. The lights on these react better than several of the other kits out there. One pair of lights is always on and another comes on with forward throttle. I use those for headlights. This is more realistic than another kit that flashes the forward lights when you apply throttle. There are 4 slots for turn signals. You also have brake lights that go off as soon as you apply throttle. There is one last set of lights that only come on with braking or reverse throttle. I'm using those as reverse lights. This is going on a crawler with a heavy drag brake so I rarely apply actual braking from the transmitter. I'm not sure what the channel 3 plugs are for, but I just removed the two wires altogether. My ESC didn't like going through this unit so I used a splitter to send the ESC signal to here and my receiver. I also substituted some of these LEDs for others from another kit. I don't know why anyone would want blue LEDs so I got rid of those. I also used orange LEDs instead of the yellow ones in this kit.

  • L***

    06-11-2017

    Great product! Thank you! I will buy from them again!

  • H***

    03-11-2017

    Thanks for the great service.. Fast shipping .Its working great

  • X***

    19-07-2017

    Recieved it fast good seller

  • D***

    09-06-2017

    Perfect thanks again!!

  • B***

    14-05-2017

    great seller!!! thanks A+++

Product Queries (0)

Login or Registerto submit your questions to seller

Other Questions

No none asked to seller yet