Atomstack S40 Max 40W Laser Engraver with Dual Air Assist Pump and 4in1 Y-axis Rotary Roller and 8pcs Height Raised Footpad and AC1 Camera and 400x400mm Honeycomb Working Table

Features:
♦ The latest high-power laser engraving machine: ATOMSTACK S40 Max, as the most cutting-edge laser engraving machine, has the highest optical power of 40W in the industry, which is suitable for professional work and greatly improves work efficiency. It can cut through 20mm tung wood, 19mm basswood, pine and paulownia wood at one time, 9mm MDF density board, and can cut through 0.1mm stainless steel sheet at one time.
♦ Upgraded compressed spot coupling technology: the ultra-fine laser focus area is reduced to 0.1*0.1mm, and the high-density laser can easily cut thick wood boards and black acrylic; it can directly engrave mirror stainless steel, metal, ceramics, and glass, and the engraving and cutting speed is higher than 30W 40%, which is comparable to the cutting effect of an 80W CO₂ laser engraving machine.
♦ Larger creative space: You can have a maximum working area of 850*400mm without the need for an extension rod, meeting 99% of laser engraving machine usage scenarios. Moreover, with the modular design of the fuselage mechanism, you only need to replace the Y-axis frame assembly to obtain a large engraving size of 850*800mm.
♦ Switch engraving/cutting mode with one click: Atomstack S40 Max adopts a new laser design, which can switch between 20W and 48W power with one click through physical buttons. Different modes can be turned on for different engraving and cutting tasks, which can be used for both fine engraving and powerful cutting.
♦ New motion structure: Different from previous Atomstack machines, S40 Max adopts a linear guide X-axis with a stable and better structure, allowing the machine to work stably at high speeds, and the engraving and cutting lines are smooth without shaking.
♦ Tank chain bundling: In order to make the machine more beautiful and the structure more stable, Atomstack S40 Max adopts a tank chain wire bundling scheme that is not found in other models. The wire harness runs smoothly without getting entangled, and the wire life is improved.
♦ Professional cutting machine: using the most stable 40W high optical power laser module at present. The latest 8-piece 6W laser coupling technology, the peak power can be as high as 48W, which can cut 20mm basswood, 25mm pine and paulownia, and 12mm MDF density board.
♦ Standard F30 Pro upgraded air kit: Standard air assist greatly improves cutting capabilities. At the same time, cutting accuracy and cutting quality can also be greatly optimized, making S40 Max a truly professional laser cutting machine.
♦ Upgrade to Atomstack's self-developed 32-bit motherboard: built-in 256-bit color scale map, making the engravings more detailed and with higher contrast, so that your engravings are not just black.
♦ New non-clogging laser: The new X40 laser has a built-in tool-free focusing module and a built-in air assist system, without wire interference, simple and beautiful. There is also a patented double-layer wind collecting cover design, which can ensure long-term use without clogging or contaminating the lens, greatly extending the life of the laser.
♦ S elf-developed mobile APP: Atomstack' s self-developed mobile APP is now available in major Android application markets and Apple APP store (you can also scan the QR code of the manual to download). It is small and multi-functional, bringing a new control experience, come here Give it a try.
♦ New filter panoramic glass eye conservation design: The panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of ultraviolet light. You and the people around you do not need to wear goggles to watch. Laser engraving. Reduce your goggle expense and inconvenience of wearing goggles.
♦ Sturdy and easy-to-install structural design: The all-aluminum alloy anodized structural design makes the machine more solid and durable, and at the same time improves the accuracy of engraving. The entire structure is designed for rapid installation and can generally be installed in 20-30 minutes.
♦ Integral screw: The machine uses an integral screw instead of a combined coupling. The stepper motor and screw are integrated, which makes the movement of the laser more precise and the coupling more durable.
♦ Broad compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL and LightBurn, and supports Win XP/Win 7/Win 8/XP/Win 10. It also supports MAc system (LightBurn) and engraving file formats. Support NC, BMP, JPG, PNG, DXF, etc.

Necessary Accessories for Laser Cutting:With this accessory to cut wood, acrylic and other materials, the edges of the wood are neat and clean, not easy to be yellowed by smoke, and you can get a clean cutting work. 400x400mm working area is suitable for most popular laser engraving machines, maximize the cutting area.
Observable Design:When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb will emit a bright light, which means that the cutting has penetrated. Easier to judge whether cutting through. You don’t need to calculate the number of cuts, just keep repeating cutting until the bottom glows, which means the material has been cut through.
Safe Metal Desktop conservation Board:All made of metal, processed by high-precision CNC, solid structure not easy to deform, and high flatness. And equipped with a metal desktop conservation board, which can protect the table from laser damage.
Square Measuring Ruler:X-axis and Y-axis contain precise scale lines to form a right-angle measuring ruler, which is convenient for you to measure the size of cutting objects quickly.
Wide Compatibility:Compatible with various mature laser engraving machines, such as diode DIY laser engraving machine and CO2 laser engraving machine.

4in1 Rotary Module: The roller with rubber covered, greater frictional forces than any sheet metal. Water resistance. 90% pre-assembled. Now you can take a few minutes to switch the mounting combination to work with the sculpted item you want. You can even experience four engravings in less than 10 minutes.
Roller Rotary: Now your baseball bat or red wine glass is always ready for engraving, so you don't even need to think about length or diameter. The engraving starts naturally when an extra-long cylindrical object or a large diameter object is placed on it.
Chuck Rotary: Y-axis Rotary Pro lets you customize your engravings in fun new ways. Bring a mug to life by engraving it with your favorite design. Complete with thumbtacks. You can also see your favorite lifestyle items personalized.
Ring Rotary: On the Y-axis Rotary Pro, the smallest diameter allows perfect engraving of rings.
Sphere Rotary: The module with suction cup assembly sliding adjustment to adapt to different diameter of the ball, with the use of the chuck ball fixed diameter 50-105mm.
Applicable to a wide range of models:  Standard two 80CM motor adapter cables are suitable for different types of engraving machine interfaces on the market. It can use with Swiitol Laser Engravers such as C18 PRO\C24 PRO\E6 PRO\E18 PRO\E24 PRO.

♦ Used with Swiitol Mode C18 PRO\C24 PRO, SCULPFUN S9\S10\S30 Series S30 ULTRA, Atomstack A10 V2\A5 V2 and Two Trees TTS-5.5W\10W\20W Laser Engraver, it allows you to engrave taller objects by increasing the height of the laser engraver and cutter.
♦ Used for the 4 corners of Laser engraving machine, each set of columns can increase the engraving height by 60mm.
♦ It includes 8 raised foot pads, which can be matched in pairs, and the machine can be raised by 12cm.
♦ Both taller objects and flat materials and cylindrical materials with rotating attachments can be engraved.
♦ Easy to install and non-slip.

Industrial Digital Camera: Different from the electronic camera, the atomstack maker camera is a 5 mega-pixel HD industrial digital camera, which ensures accurate positioning during use.
Large Positioning Area: Industrial wide-angle lens, perfect for machines within 450*450mm frame (Photography range 400*400mm)
Precise Positioning: The industrial camera specially customized for the laser engraving machine is deeply matched with Lightburn software. After simple calibration, it can automatically locate the area and the object for work, with the positioning error less than 1 mm.
Multitask Operation: With the precise positioning of the camera, multiple independent tasks can now be completed at one time. Under the guidance of the camera, the laser will automatically find carving objects one by one and work.
Work Preview: No need to straighten the carving materials any more. The atomstack maker camera perfectly solves the positioning problem of special-shaped patterns. Now you can design directly on the surface of consumables, and what you see is what you get.
Video Record&Time-lapse photography: Please share your amazing creative creation process with everyone. Through the delayed shooting of the camera, you can record the completion of the whole work and share it.
High Adaptability: The atomstack maker camera can be compatible with all Atomstack , Ortur, NEJE and xTool frame laser engraving machines (Lightburn software is required).


Specification: 
Product model: Atomstack S40 Max
Engraving size: 850*400mm
Materials that can be engraved/cut
Engraving material: wood, bamboo, cardboard, plastic, leather, PCB version, alumina, non-reflective
Radiated electroplated and painted metal, 304 mirror stainless steel, glass, ceramics, cotton, slate;
Cutting materials: cardboard, non-woven fabrics, wooden boards, plywood, acrylic (transparent needs to be painted black), some thin plastic boards, sponges, aluminum and stainless steel and other metal sheets;
Machine power: 210W
Laser power: 180W (in cutting mode)
Laser output optical power: 40-48W
Laser wavelength: 455±5nm
Engraving accuracy: 0.01mm
Focusing method: fixed focus laser, no focus adjustment required
Laser protective cover: There is a protective cover on the laser to protect the user's eyes, without the need to wear additional goggles. At the same time, it prevents pets from scratching the laser point
Operating software: LaserGRBL, LightBurn, supports Win XP/Win 7/Win 8/XP/Win 10 system
Supported file formats NC, BMP, JPG, PNG, DXF,
Data transfer method: USB connection

Material: High-strength Steel
Product Size: 400x400mm
Product Thickness: 22mm
Diameter of Honeycomb Mesh: 9mm

Chuck rotary
Radio: 5.7:1
Diameter:26- 140mm
Engrave diameter range (Use additional risers)
Roller: 5mm-1 50mm
Chuck: 1mm-1 15mm
Sphere: 50mm-105mm
Ring: 15mm-1 10mm
Product Weight: 2090g

For: Swiitol Engraver Models - C18 PRO\C24 PRO
Size: L60 x D30mm
Quantity: 8PCS

Brand: Atomstack Maker
Model: AC1
Pixel: 5MP
Resolution: 2592*1944
Sensor: 1/2.5" CMOS Sensor
Pixel Size: 2.2μm x 2.2μm
FOV: D: 92° H: 86° V: 56°
Camera size: 42*42*29mm 
Support Laser Machine Frame: 450mmx450mm
Photography range: 400mmx400mm
Software: Lightburn
Driver: Driver-free for Windows/Mac systems

Packing List:
1×Extended X-axis assembly
1×base upper profile
1×base lower profile
1×laser module
2×tank chain
1×F30Pro Dual Pump Air Assist
1×Mounting screw
1× tool kit
4×foam foot pads
1×fixed focus film
3×acrylic sheets
3×wood chips
10×Wire ties
1×desiccant
1×Brush
1×dust-free cloth
1×card reader
1×TF card
1×power adapter
1×Instruction Manual
1×data cable
1×Y axis left profile
1×Y axis right profile
3×foot bracket

1 x SCULPFUN honeycomb panel
1 x 400x400mm metal desktop conservation board

1 x 4in1 Y-axis Rotary Roller

8 x Riser
20 x Screw Nut
1 x Parts Kit

1 x AC1 Camera Kit