Atomstack S40 Pro 40W Laser Engraver with Dual Air Assist Pump and 400x400mm Laser Cutting Honeycomb Table

Features:
High power: ATOMSTACK S40 Pro, as the most cutting-edge laser engraving machine, has the highest 40W optical power in the industry, which is suitable for professional work and greatly improves work efficiency. It can cut through 18mm basswood, pine and paulownia at one time, and 9mm The MDF density board can cut through 0.1mm stainless steel sheet at one time.
Switch the engraving/cutting mode with one key: ATOMSTACK S40 Pro adopts a brand-new laser design, which can switch between 20W and 40W output power with one key through the physical button, and open different modes for different tasks of engraving and cutting. Strong output.
New motion structure: Different from Atomstack's previous machines, Atomstack S40Pro adopts a more stable linear guide X-axis, which makes S40Pro work stably at a high speed of 600mm/s, and the engraving and cutting lines are smooth without shaking.
Tank chain harness: In order to make the machine more beautiful and the structure more stable, Atomstack S40Pro adopts a tank chain wire harness solution that is not available in other models. The wire harness runs smoothly without entanglement and improves the life of the wire.
Professional cutting machine: adopt the most stable 40W high optical power laser module at present. The latest 8 6W laser coupling technology, the peak power can be as high as 48W, can cut 20mm basswood, 25mm pine and paulownia, 12mm MDF density board.
Standard automatic switch air assist kit: standard F30Pro high-flow air assist, you can turn on the lightburn M7 mode to realize automatic switch air assist in different modes of cutting/engraving. While the cutting ability has been greatly improved, the cutting accuracy and cutting quality can also be greatly optimized, making Atomstack S40Pro a real professional laser cutting machine.
Upgrade Atomstack's self-developed 32-bit motherboard: built-in 256-bit color scale map, which makes the engraving work more delicate and has higher contrast, so that your engraving is not only black.
New non-blocking laser: The new S40 laser has a built-in tool-free focusing module, and a built-in air assist system, without the interference of wires, simple and beautiful. The patented double-layer wind gathering cover design can ensure that the laser will not be blocked and the lens will not be polluted for a long time, which greatly improves the life of the laser.
Atomstack's self-developed mobile phone APP: Atomstack's self-developed mobile phone APP is now available in major Android application markets or APP store (you can also scan the QR code of the manual to download). It is small and multi-functional, bringing a new control experience. Come on, give it a try.
Brand-new filter panoramic glass eye protection design: the panoramic filter glass protective cover can protect your eyes very well, filtering 97% of ultraviolet light, you and the people around you can watch without wearing goggles Laser engraving. Reduce your goggle expense and inconvenience of wearing goggles.
Sturdy and easy-to-install structural design: The all-aluminum anodized structural design makes the machine more durable and improves the engraving accuracy. The whole structure has been designed for quick installation, and the installation can be completed in generally 20-30 minutes.
Wide compatibility: the machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, supports Win XP / Win 7 / Win 8 / XP / Win 10, also supports MAc system (LightBurn), engraving file format Support NC, BMP, JPG, PNG, DXF, etc.
Upgraded compressed spot coupling technology: ultra-fine laser focus area reduced to 0.1*0.1mm, high-density laser can easily cut thick wood, black acrylic; can directly engrave mirror stainless steel metal, ceramics, glass, engraving & cutting speed is higher than 30W 40%, comparable to the cutting effect of 80W CO₂ laser engraving machine.
Integral screw: The machine uses an integral screw instead of a combined shaft coupling. The stepping motor and the screw are integral, which makes the movement of the laser more precise and the coupling more durable.
Safety protection: Equipped with an emergency stop button, if there is an unexpected situation, the machine can be stopped at any time, and it is equipped with a reset switch and a limit switch to engrave more safely.

Necessary Accessories for Laser Cutting: With this accessory to cut wood, acrylic and other materials, the edges of the wood are neat and clean, not easy to be yellowed by smoke, and you can get a clean cutting work. 400x400mm working area is suitable for most popular laser engraving machines, maximize the cutting area.
Observable Design: When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb will emit a bright light, which means that the cutting has penetrated. Easier to judge whether cutting through. You don’t need to calculate the number of cuts, just keep repeating cutting until the bottom glows, which means the material has been cut through.
Safe Metal Desktop Protection Board: All made of metal, processed by high-precision CNC, solid structure not easy to deform, and high flatness. And equipped with a metal desktop protection board, which can protect the table from laser damage.
Square Measuring Ruler: X-axis and Y-axis contain precise scale lines to form a right-angle measuring ruler, which is convenient for you to measure the size of cutting objects quickly.
Wide Compatibility: Compatible with various mature laser engraving machines, such as diode DIY laser engraving machine and CO2 laser engraving machine.

Specification:
Model: S40 pro
Engraving size: 400*400mm
Engravable/cuttable materials
Carving material: wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective
Electroplated and painted metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate;
Cutting materials: cardboard, non-woven fabrics, wood, plywood, acrylic (transparency needs to be painted black), some thin plastic plates, sponge, metal sheets such as aluminum and stainless steel;
Machine power: 210W
Laser power: 180W (in cutting mode)
Laser output optical power: 40-48W
Laser wavelength: 455±5nm
Engraving precision: 0.01mm
Focusing method: fixed focus laser, no focusing
Laser protective cover: there is a protective cover on the laser to protect the user's eyes, no need to wear additional protective glasses. At the same time prevent pets from grabbing the laser point
Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system
Supported file formats: NC, BMP, JPG, PNG, DXF,
Data transmission method: USB connection

Material: High-strength Steel
Product Size: 400x400mm
Product Thickness: 22mm
Diameter of Honeycomb Mesh: 9mm

Packing List:
1 x linear guide X-axis assembly
1 x profile on the base
1 x Base lower profile
1 x laser module
2 x tank chain
1 x F30Pro dual pump air assist
1 x Mounting screw
1 x tool bag
4 x foam pads
1 x fixed focus film
3 x acrylic sheet
3 x wood chips
10 x wire tie
1 x desiccant
1 x clean brush
1 x clean cloth
1 x card reader
1 x TF card
1 x power adapter
1 x manual
1 x data cable
1 x Y axis left profile
1 x Y axis right profile
3 x foot bracket
1 x goggles
 
1 x SCULPFUN honeycomb panel
1 x 400x400mm metal desktop protection board