Sculpfun iCube Pro Max 10W Laser Engraver Portable Laser Engraving Machine

(16 reviews)
Estimate Shipping Time: 7 Days

Price:
$359.10 /Pc
Dispatch:
Usually will be shipped in 24 hours
Club Point:
20

Quantity:

Total Price:
Refund:
Features:
♦ 10W Powerful Cutting Laser: The iCube Pro Max uses 10W diode laser with 0.08mm laser focus. It has stronger laser performance, cutting penetration and higher working efficiency, which can engrave or cut more difficult materials and complete the laser tasks faster.
♦ High-Speed Engraving: iCube ProMax 10W laser engraver with the 32-bit motherboard greatly improves the engraving efficiency, which can reach 10000mm/min engraving speed.
♦ With Smoke Filter: Sculpfun iCube laser engraver is equipped with the smoke filtration system that effectively filters the smoke generated during the engraving and cutting process without the enclosure, which makes it more convenient to engrave and cut in an office or home. Bringing more usage scenarios and enjoying the fun of engraving without limitation.
♦ Multiple Connection Methods: The laser engraving machine supports mobile phone and computer system connection. You can connect to iCube machine via your mobile phone with Sculpfun APP, or you can connect to the computer with the BT function or Type-C interface data cable to use. It is compatible with Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux system.
♦ Temperature Alarm Function: Built with the temperature alarm device, the machine will stop running and emit a buzzer alarm when the temperature inside the engraving machine is over 45℃ to ensure the safety of users and equipment. And when the temperature descends, restart the machine to start the work.
♦ Enclosed Eye conservation Shield: iCube portable laser engraver is designed with a detachable fully enclosed Acrylic material eye conservation shield, which can effectively protect your eyes from different angles. It enables you to observe the laser engraving process without wearing the goggles.
♦ Engraving Objects without Size Limit: With the unique semi-open structure design, there is no limitation by the size of the engraving objects. You can place them inside the machine or put the machine on the surface of some large objects to perform the tasks. The pattern's engraving area is 120x120mm which can meet your various engraving demands.
♦ Replaceable Laser Lens: Sculpfun iCube series adopts an innovative laser head that supports to replace the laser lens, which greatly improves the service life of the laser by more than 10 times longer than that of other general lasers. When the lens is damaged or dirtied after long-term use, it can be replaced to restore the cutting power.


Specification:
Product Model: Sculpfun iCube ProMax 10W
Fan Speed: 5000RPM
Temperature Sensor: 45℃ Trigger
Bluetooth: 4.2
Wi-Fi: 2.4Ghz
Wavelength: 455nm
Engraving Area: 120x120mm
Laser Head Power: 10W
Image Format: JPEG/BMP/TIF/GIF etc.
Laser Spot: 0.08mm
Working Voltage: 110-240V AC, 50/60Hz
Working Current: 12V 5A
Optimal Focusing Distance: 40mm
Support System: Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux

Operation Application Software:
Computer: LightBurn/LaserGRBL
Mobile Phone: Sculpfun APP

Product Weight: 3.2KG
Product Size(LWH): 262*300*226mm
Package Weight: 4.75KG/10.4lb
Package Size: 318x282x360mm/12.5x11.1x14.1in

Some Important Tips:
1: About the Engraving Materials:
Note that any specular reflective objects can not be engraved, otherwise the laser reflection will damage the laser head.
2: About the smoke filter:
A free set of cotton filter is attached with purchasing, it needs to be replaced periodically to ensure the filter effect.
3: About the laser lens:
A free lens is attached in the package with purchasing, which also can be ordered separately.


Packing List:
1 x Laser Engraver
1 x U-Shaped Shield
1 x Metal Plate
1 x Laser Head
1 x Power Adapter
1 x Power Cable
1 x Type-C Data Cable
1 x Cotton Filter Set
1 x Lens Repair Kit
1 x Goggle
1 x Basswood Board
1 x MDF
1 x Installation Instruction

Precautions:
●Because of the powerful laser, it is forbidden to run the engraving machine unattended. Please pause it if you're not around.
●Please refer to the user manual for detailed machine instructions and parameter settings.
●Please install the laser protective cover before operating the machine; if not, a pair of goggles is needed.
●Do not touch the laser with your hands, or it may burn your hands.
●Please avoid strong impact on the machine.
●Children under 14 are not allowed to use this product and children over 14 need adult supervision.
●Do not apply the laser directly to any specular reflective objects as this may cause injury to the operator or burn the laser.
  • I***

    08-12-2024

    Very good product, I will buy again

  • S***

    08-12-2024

    The service is very good, I like it very much

  • Y***

    08-12-2024

    very good.

  • O***

    04-12-2024

    Highly recommend this product! It’s durable, reliable, and works perfectly for my needs. I’m very happy with my purchase.

  • T***

    03-12-2024

    I’m very impressed with the performance of this product. It’s efficient, easy to use, and exactly what I needed.

  • T***

    29-11-2024

    Very good product, I will buy again

  • C***

    19-11-2024

    Amazing product! The quality is fantastic, and it has exceeded all of my expectations. Would definitely buy again.

  • J***

    15-11-2024

    very good.

  • Q***

    14-11-2024

    very good.

  • T***

    11-11-2024

    I’m very impressed with the performance of this product. It’s efficient, easy to use, and exactly what I needed.

  • O***

    12-06-2024

    I have been using the SCULPFUN iCube Pro Max laser engraver for a few weeks now and am very happy with it. The engraving speed is up to 10,000 mm/min and the engraving is very clear, black and white.

  • I***

    03-06-2024

    I really like this iCube Pro Max. It is small in size and does not take up much space. It can meet my daily work needs and I have recommended it to my friends.

  • Z***

    28-05-2024

    Great laser equipment.

  • U***

    10-01-2024

    Fast shipping, no damage to the packaging, product quality is very good, ready to use out of the box, easy to use, cost-effective, recommended!

  • G***

    05-01-2024

    This iCube Pro Max 10W laser engraving machine fits my needs perfectly. Semi-open structure design, not limited by the size of the engraved object. However, 120x120mm basically meets my engraving needs. I just use it to DIY some small crafts, hanging decorations, etc. The carving quality is really great.

  • P***

    01-01-2024

    The product is well made, high quality and low price, and the engraving effect is very good.

Product Queries (0)

Login or Registerto submit your questions to seller

Other Questions

No none asked to seller yet