SCULPFUN S10 10W Laser Engraver with CAM500 Camera

Features:
10W laser Beam Shaping Technology: The S10 laser output power is increased to 10W, which is twice that of the S9.  But S10 obtains the same ultra-thin laser beam with 0.08mm focus as S9, which means S10 has higher energy density, stronger cutting penetration and engraving capabilities.
Powerful High-speed Air Assist: Equipped with a high-speed air assist nozzle. Advanced fluid mechanics design to better utilize the air pressure. When using the same air compressor, the S10 spray airflow faster. For example, when using 30L/min, 0.03Mpa air compressor, the S10 nozzle will spray high-speed airflow up to 14.5m/s. This will greatly improve the cutting penetration and cutting efficiency.
Industrial-grade Cutting Accuracy: S10 adopts industrial high-precision linear slide rail X-axis, which makes it get industrial-grade engraving accuracy. When comparing the small engraving details, S10 does not have the wave lines that other ordinary engraving machines appear.
More Advanced and Upgradable 32-bit Motherboard: The S10 motherboard uses 32-bit chips, with faster computing speed, and it still reserves Z-axis and limit switch functions to facilitate people to upgrade the engraving machine. It still perfectly supports laser cutting software like Lightburn and LaserGRBL.
Square Measuring Ruler: X-axis and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly. The 400x400mm large-area engraving interval can meet your various engraving needs.
Detachable Laser Shield & Safe Design: Equipped with a detachable eye shield, which will not dazzle even without glasses. And if you don't need it, you can easily disassemble the eye shield. There is a very safe and eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency. The all-metal body makes the machine very sturdy and durable. And the free A4 size steel pad can protect the table from laser damage, isolate fire hazards.

1. Industrial Camera for Laser Engraver: This industrial assist camera is specially designed for laser engraving machines, which fully matches with the lightburn software. With a true high-definition 5MP, this laser camera can capture clearer images and identify more accurate positioning.
2. Precise Positioning: The SCULPFUN CAM500 camera is perfectly fit with the CAM function of the Lightburn software, which can identify the position of engraving objects via the camera, with a positioning deviation of less than 1mm.
3. Engraving Position Controlling: With the Sculpfun CAM500 Lightburn camera, you can move the pattern onto a certain position of the material through the lightburn software interface. After the setting is complete, the laser machine will engrave the pattern at that position.
4. Image Tracing: CAM500 camera module can identify and extract the patterns from the surface of objects such as T-shirt patterns, children's hand-drawn patterns or other simple designs and form engraving vector files, which is super convenient for getting vector files quickly.
5. Batch Engraving: Through the laser Lightburn camera, you can add multiple engraving objects and complete the different independent tasks at one time, without the need to preview the positioning of each engraving material. The laser will automatically find the engraving objects one by one and work on them, which improves the working efficiency.
6. HD Video Recording: This laser engraving camera has a 120° wide-angle lens with a working area of 400*400mm. It can record the entire creation process of works through camera time-lapse shooting, easy for you to share the creative process with friends. And also makes the engraving and cutting visible and observable.
7. High Adaptability: 2 fixation structures, T-shaped fixation clamp and U-shaped fixation clamp. T-shaped fixation clamp is suitable for SCULPFUN machine models including S6,S6 pro,S9, S10, S30/S30 Ultra series and almost all engraving machines with V-slot structure. Please note that the additional purchased area expansion kit is not applicable. U-shaped fixation clamp is suitable for U-shaped beam machines. Other applicable models: D1PRO, falcon2, LM2 PRO S2, 20PRO 20S, 55, JL3, 3 MAX V2. 

Specification:
Model: S10
Diode Laser Output Power: 10W (Note This Is Light Energy Not Electrical Energy)
Inner Diameter Of Air Pipe: 7.5mm (Recommended To Use 30L/Min, 0.03mpa Air Compressor, Out Diameter Of Nozzle: 8mm)
Laser Wavelength: 455±5nm
Engraving Accuracy: 0.01mm
Engraving Area Size: 410x400mm
Focusing Method: Fixed Focus + Sliding Device
Laser Protection Cover: Equipped With a Detachable Laser Cover To Protect The Eyes. You Can Adjust It Up And Down, Or Remove The Cover
Machine Power Consumption: About 36W (Not Related To Engraving Or Cutting Performance, Just Power Consumption)
Engraving/Cutting Materials:
Engraving Material: All Kinds Of Wood (Including Walnut, Cherry And Other High Density Wood), MDF, Bamboo, Cardboard, Plastic, Leather, PCB Board, Alumina, 304 Stainless Steel, Ceramic, Dark Stone
Cutting Material: All Kinds Of Wood (Including Walnut, Cherry And Other High-Density Wood), MDF, Acrylic, Cardboard, Bamboo, Some Plastic Boards, Leather, PCB Boards
Laser Software: LASERGRBL, LIGHTBURN, LASERGRBL, LIGHTBURN, BENBOX, GRBLCONTROLLER, LITEFIRE
Support System: Support MAC, Windows System
Supported File Formats: NC, BMP, JPG, PNG, DXF And Other Image Formats
Data Transfer Method: USB Connection
Power Input: 100-240V AC, 50/60hz; Output: 12V 5A
Product Weight: 3.42kg

Product Model: SCULPFUN CAM500
Mount Material: Aluminum
Recommended Height from the Camera to the Engraving Position: 325mm
Optimal Working Area: 400*400mm
Product Size (Horizontal Rod and Vertical Rod are the same): 400*15*20mm  Notice: please allow the variations due to manual measurement!
Compatible System: win7/win10/win11/mac (Notice: For better product usage experience, we recommend to use with the system win7 later version)

Camera Parameter:
Pixel: 5MP
Color Image Sensor: 1/4-inch CMOS
Maximum Resolution: 2592*1944
Pixel Size: 1.4um*1.4um
Focal Length: 1.79mm
Focusing Mode: Fixed Focus
Fixed Focus Distance: 325mm
Viewing Angle Width: 120°
Aperture: F2.4
USB Interface: USB 2.0

Note:
●Because of the powerful laser of S10, it is forbidden to run the engraving machine unattended. Pause it if you're not around.
●For detailed machine instructions, please refer to the manual for parameter settings.
●When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
●Do not touch the laser with your hands, otherwise you may burn your hands.
●Please avoid strong impact on the machine.
●It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended.
●Do not use the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.

Packing List:
1 x Camera Horizontal Rod Assembly
1 x Camera Vertical Rod Assembly
1 x T-shaped Clamp Assembly
1 x Camera Slider (Rod Connector)
1 x U-shaped Clamp Assembly
1 x Screw Bag
4 x Basswood Plywood
3 x A5 Size Image Calibration Paper
1 x User Manual
1 x Soft Ruler

1 x X-Axis Assembly
2 x X Profiles
2 x Y Profiles
1 x Control Box Assembly
3 x Support Feet
1 x S10 Laser
1 x 12V 5A Power Adapter
1 x Power Cord
1 x USB Cable
1 x Air Tube
3 x Tool Bag
1 x Laser Goggles
1 x Test Wood Board
1 x A4 Size Metal Pad
Step 1-6 Install The Package
1 x User Manual